Tile Adhesive AM202

Alemora Tile Adhesive AM202 is a rapid setting, cementitious adhesive with a high Polymer content for floors and walls. It is suitable for interior and exterior use and has excellent adhesion to most standard building surfaces e.g. concrete, sand cement screed, plaster, plasterboard, rendering, fibre cement board, and existing tiles. It is also suitable for use on plywood overlaid floors.

Composition:

Alemora Tile Adhesive AM202 is a blend of specially selected grade polymer, cement, Mineral & Fillers base mortar design for tiles fixing purposes.

Available- 20Kg Bag

Enquire Now
Download Brochure HindiDownload Brochure English
Category:

Uses:
Alemora TileAdhesive AM202 is used for fixing large format floor and wall tiles, ceramic, natural stone tiles non-porous tiles vitrified and porcelain stoneware terrazzo tiles, cement rendered surfaces, dense concrete, aerated concrete, brickwork, subject to limited vibration or movement.
It requires only the addition of water or latex emulsion.

Advantages:

  • Exceptional flexibility within or thick-bed application
  • Accommodates rough/uneven and very large tiles
  • Suitable for underfloor heating
  • Pre-packed factory controlled ensures consistent quality • Easy to apply with conventional tools
  • No soaking of tiles required
  • Good adhesion to smooth surfaces
  • Good waterproofing characteristics &increased flexibility
  • The surface can be, put to use after 24 hours.

Technical Specifications:

  • Colours: Grey
  • Coverage Approx.: 1m?/kg per 3to 5mm thickness
  • Working Temperature: Between 5°C & 35°C
  • Mixing Ratio Approx.: 6.5 It of water to 20kg bag 15 Minutes
  • Open Time:
  • Pot Life Approx.: 2 hours
  • Set Time Approx.: 2-3 hours @27°C
  • Tensile Adhesion Strength(EN 1348): ≥0.5 N/mm2
  • Curing Approx.: 24 hours
  • Storage &Shelf Life: Can be stored in dry conditions for a maximum of 12 months
  • Packaging: 20 kg

Technical Specifications

Properties
General Data
Appearance: Grey Powder
Shelf life: 12 Months when Stored In The Original Sealed Packing Place.
Application Data
Application temperature range: (+5°c )-(+35°c)
Mixing Ratio: 6-7 Liters /20kg powder 3:1 Liters water
Pot life: Approx. 6hours
Skip (EN 1308): ≤ 1.5 mm
Open Time (EN 1346): After 30 minutes ≥ 0.5 N/mm2
Grouting: 8 hours on wall, 24 hours after on floor
Consumption: 3.5 kg/m2
Tensile adhesion strength (EN 1348)
Initial: ≥ 1.5 N/mm2
After heat exposure: ≥ 1.5 N/mm2
After immersion in water: ≥ 1.5 N/mm2
After freeze/thaw cycles: ≥ 1.5 N/mm2

Related products