Tile Adhesive AM303

Alemora Tile Adhesive AM303 is a high performance, high strength polymer modified thin set adhesive used with water. Alemora Tile Adhesive AM303 is designed for interior and exterior floor and wall installation of all types of heavy stone cladding granite and marble fixing.

Available- 20Kg Bag

Enquire Now
Download Brochure HindiDownload Brochure English
Category:

Advantages:

  • Exceptional flexibility with Thin or thick-bed application
  • Rapid setting grout after 2-3 hours
  • Accommodates rough/uneven and very large tiles
  • Suitable for underfloor heating
  • Pre-packed factory controlled ensures consistent quality
  • Easy to apply with conventional tools
  • No soaking of tiles required
  • Good adhesion to smooth surfaces
  • Good waterproofing characteristics &increased flexibility
  • The surface can be, put to use after 24 hours

 

Technical Specifications

Properties
General Data
Appearance: Grey Powder
Shelf life: 12 Months when Stored In The Original Sealed Packing Place.
Application Data
Application temperature range: (+5°c )-(+35°c)
Mixing Ratio: 6-7 Liters /20kg powder 3:1 Liters water
Pot life: Approx. 6hours
Skip (EN 1308): ≤ 2.0 mm
Open Time (EN 1346): After 30 minutes ≥ 0.5 N/mm2
Grouting: 8 hours on wall, 24 hours after on floor
Consumption: 3.5 kg/m2
Tensile adhesion strength (EN 1348)
Initial: ≥ 2.0 N/mm2
After heat exposure: ≥ 2.0 N/mm2
After immersion in water: ≥ 2.0 N/mm2
After freeze/thaw cycles: ≥ 2.0 N/mm2

Related products